If you look at the magazine, you'll see that the slide hold-back is activated by a little loop at the top of the mag spring that sticks out through a...
She thanks you. That's her baby picture, she's almost two, now.
Thanks, Doug. I'm going to get mine of the back of the safe and give it another go...and send it back it there's trouble. Appreciate the update on...
Wolff is a third-party supplier of various springs for a very large number of different handguns. They're pretty much the go-to supplier of...
I don't know...this happens often enough and to enough people to make me think the problem isn't ammo related. Inertial feeds, if that's what is...
Well, yeah. The ones that didn't rattle were seized up tight.
What Cavelamb says is very true. Make sure you do a complete function test of all the safety features after assembly.
Quick report: After polishing as reported above, thoroughly cleaning and re-oiling with the Wilson Combat Light oil (looks, smells, tastes and is...
I just rounded the corners (careful guys...only needs a few light strokes with an oiled India stone), then polished the inside of the hood and out to...
Interesting. I have Kuhnhausen, too, and I had noted the comments about the underside of the barrel hood. Mine had a nice chamfer out of the box so...
I'd learn to live with it. Slide to frame fit doesn't have all that much affect on accuracy, anyway. Barrel-to-slide fit in lockup is more...
Mine's been a little loose since new. After 1,1100 rounds don't think it's getting any worse. Gun works fine. I wouldn't worry about it. I've...
The mag for the Colt .380 will definitely not work in the Black Label 1911-380. Mine was pretty cranky at first, but settled down nicely after I...
jjjmount, I've got about 500 rounds on mine and it has settled down very nicely. My wife will get an occasional misfeed on the sixth or seventh...
No, I don't think it strange at all. There is quite likely some variation among the individual units, or perhaps, as you mention, Browning may have...
Great reviews, guys. Really like mine. If you're going to be shooting the little Brownie a lot, consider having a good gunsmith go over the...
As much as I like my Black Label Browning .380, I've found the trigger action to be a bit stiff and "gritty", certainly not as smooth as it could...
I went through the same drill on the sights. Tried Testor's paints in florescent Orange, Red, Green, Yellow and Blue. What worked for me is an...
Gil, you can't really tell much about how the ejection sequence is going to work by hand racking the slide. You can't hand rack fast enough to...
I closed three of mine down to 0.305 at the front of the feed lips per the posts from TexasHawk. They work fine. My fourth mag, the one Browning...
Separate names with a comma.
