old style outer magazine tube

Discussion in 'Browning Semi-Auto 22 Rifle' started by Captain1979, Feb 9, 2015.

  1. Captain1979

    Captain1979 Copper BB

    I have an early Belgian 22SA rifle project that needs a replacement outer tube and nut. I cannot find a schematic that shows the old style parts nor a source for the part. How does one determine the correct length (11 5/8" vs 13"). My rifle is missing the lower few inches of the tube, nut, washer, etc. Please point me to a source and parts schematic.
  2. SHOOTER13

    SHOOTER13 Guest

  3. Captain1979

    Captain1979 Copper BB

    The schematic I need is for the earlier model with the bolt thru the pistol grip. My rifle also has the spring fingers under the magazine tube lock-plate. A Tech support at Brownell's advised me to contact Wisner's (360-748-4590) for the "old style" outer mag tube. Mr Wisner had both lengths and advised the spring finger retaining design required the 11 5/8" length. He did not have a schematic for the old models.
  4. SHOOTER13

    SHOOTER13 Guest

    Well...at least you're on the right path.

    Glad to help...

Share This Page