I have the citori cx. Have about 1000 rounds thru it so far. I was on the sporting clay course, shot both barrels at a few clays. Then shot both barrels and broke the action just like always, nothing ejected. No sound of the ejector springs or anything. I had to remove the hulls by hand. Reloaded, continued to shoot, no problems. Not sure what the deal was. Only thing I could think of was the gun was warm when I put it in the scabbard. It was a warm day. Just kinda wierd lol.
Very strange in deed sir, I’m in Texas and shoot in 90+ temp and humidity and never experienced any issues. If you had a bunch of rounds through it I would say pull them and look at the springs, probably replace but low round count, you should have no issues. I have seen rust and crud in there effect them, may wanna pull them out just to inspect. If it happened again I would for sure find out the cause
Since this was an intermittent problem, most likely it is quality control of the shells than the gun. I've also had a random shell hull base that expanded more than others and sorta-kinda-stuck in the chamber and had to be pried out with a fingernail or small blade. If the gun functions normally at 99.99% of all other times, then most likely is is a bad shell in that box.
