If I recall it was a custom made, I would say a little to much for the rotary action. Many years ago a friend of a friend had a 300WM shear the...
I have a late 60's Bar in 06, really no difference than my newer BARs of different caliber all steel barrels threaded to receivers and all made in...
Another point of interest inspect your cases, I owned a 742 semi auto 30-06 which ripped the rim off under the extractor I can only suspect a dirty...
I have owned as many as * of these, I am down to 4, a great gun
Life member NRA and Illinois Rife Association Navy
Browning 325SL barrel I have a new unfired Browning 325 SL, 27 ½” 2 ¾” chamber fixed choke .691/.691 upper and lower. I bought this years ago and...
I personally use 150 to 200 gran, I tried those little 110 and they cannot get a good grip with the rifling causing brass shear unless you drop the...
I have several BARs from 243 to 338, if they jam in my situation is a dirty chamber follow by dirty cases keep them shiny, check the gas port to see...
Grade 2, friend has exact in 308 mine is std
looks to be a grade 2
to my knowledge the early BAR was made in 243, 25-06, 270,308, 30-06, 7mm, 280, 300wm and 338wm
[ATTACH] [ATTACH]
It is a 9.3x74r 20 gauge , It has the s/n 224PYXXXXX, I have a couple Browning books but neither show the 224, one states it would be a Superposed...
Separate names with a comma.